The AL600 is a Single Pair Ethernet (SPE) switch designed for rugged industrial applications. The box is provided with seven 100BASE-T1 (IEEE 802.3bw) ports and in addition a 1000BASE-T uplink. The SPE connectors conform to the IEC 63171-6 industrial style mating face. The AL600 is available for DIN rail or wall mount. The M12-A power input accepts 9-57VDC. As an option the box can be equipped with a terminal block power connector.

The AL600 is equipped with the Marvell® 88Q5072 Automotive Ethernet switch and is configured by default for self-managed operation. Its PHYs are fully inter-operable with the Open Alliance BroadR-Reach® (OABR) standard for automotive connectivity. As AL610, the switch box is also available with a mezzanine CPU card (AC370) for additional protocol support and wireless communication.

AL600 • Single Pair Ethernet Switch

Technical Features

General 100BASE-T1 IEEE 802.3bw Ethernet switch box, for DIN rail or wall mount 7 x T1 industrial jacks IP20 according to IEC 63171-6 1 x RJ45 1000BASE-T Gigabit Ethernet connector Intended for industrial and automotive use Self-managed operation Dimensions: 30mm (W) x 140mm (H) x 70mm (D) w/o DIN rail bracket Metal case, DIN rail bracket or wall mount plate M12-A DC power connector Option terminal block power connector Option desktop power adapter connector 9-57VDC power input operation

Front Panel I/O 1 x RJ45 1000BASE-T GbE connector, integrated magnetics 7 x 100BASE-T1 SPE front ports IEC 63171-6, Hi-Pot isolated by transformers 1 x M12-A 5-pin DC power input

Single Pair Ethernet Switch Marvell® 88Q5072 11-port Automotive Ethernet switch AEC-Q100 Grade 2 qualified 802.1Qat SR Aware 20Gbps switching engine 2 Mbit packet memory +16 MAX addresses Queue controller 8-Level QoS per port 256 entry TCAM (ingress & egress) 3 color ingress policy Hardware support for Layer 3 static routing AVB/TSN per queue shaping 802.1Qav/Qbv 802.1AS & IEEE 1588/PTP Advanced security features including deep packet inspection engine (DPI) DoS (Denial of Service engine) On-Board EEPROM up to 512kb for switch configuration Integrated high-performance ARM® Cortex® M7 CPU 350MHz w. 1MB SRAM Integrated IEEE 802.3bw 100BASE-T1 PHYs Single Pair Ethernet SPE SPE PHYs configured as Master by default Fully inter-operable w. Open Alliance BroadR-Reach® (OABR) PHYs 1 x front port RJ45 connector 1000BASE-T (88EA1512 RGMII PHY) 7 x front port connectors 100BASE-T1 SPE IEC 63171-6 (88Q5072 integrated PHYs) 2 x 5Gbps SERDES internal mezzanine connectors for port expansion (16- or 24-port versions) AL610 available (AL600 with AC370 CPU card for protocol support)

Power Requirements DC Input, 9-57V (12VDC, 24VDC, 48VDC) Absolute maximum input voltage 65VDC Power consumption 2.5W max. Fast acting chip fuse (PCB soldered type) Protected against reverse polarity ESD protection (TVS) Common mode input filter Sales option terminal block 3.5mm pitch 4-position screw lock (bottom of box) power input Sales option rear power connector (desktop adapter 4-pos. circular connector)

Applications Industrial networks - IIoT Automotive gateway In-vehicle networking Automotive test equipment Rugged environments Edge computing Transportation Construction vehicles Harvester

Environmental, Regulatory Designed & manufactured in Germany Certified quality management according to ISO 9001 Long term availability Rugged solution RoHS compliant Operating temperature -40°C to +85°C (industrial temperature range) Storage temperature -40°C to +85°C, max. gradient 5°C/min Humidity 5% ... 95% RH non condensing Altitude -300m ... +3000m Shock 15g 0.33ms, 6g 6ms Vibration 1g 5-2000Hz EC Regulatory EN55035, EN55032, EN62368-1 (CE) MTBF 134.4 years

all items may be subject to technical changes